Survey console Site map

GNSS Survey Console

Two u-blox F9P receivers as an RTK pair: centimetre positions, straight from USB in this browser (Chrome or Edge).
  1. Base - receiver that stays put: Connect, Start base, wait for broadcasting.
  2. Rover - receiver you carry: Connect, Live monitor until it shows FIX=true.
  3. Survey origin, then camera_a and camera_b (and any reference points), then open the Site map to check them and write cameras.local.yaml.
checking relay...
The cloud relay forwards corrections from Base to Rover (it has no GPS access of its own). Only change it if you run your own relay.
idle

1. Base (USB)

The receiver that stays put for the whole survey. Needs open sky.
idle
idle

2. Rover (USB)

The receiver you carry to each spot. Survey "origin" first; only trust a point once it shows FIX=true.
idle